Regulatory Compliances

CE and UKCA Notice

This device complies with the requirements of the CE directive and UKCA regulations.

Low Voltage Directive 2014/35/EU + Electrical Equipment Safety Regulations 2016 (SI 2016 No 1101)

  • EN 62368-1 :2014+A11:2017

EMC Directive 2014/30/EU + Electromagnetic Compatibility Regulations 2016

  • EN 50121-4:2016+A1:2019

  • EN 61000-6-4:2007+A1:2011

  • EN IEC 61000-3-3:2013+A1:2019

  • EN 61000-3-3:2013+A1:2019

  • EN 61000-4-2:2009

  • EN 61000-4-3:2006+A1:2008+A2:2010

  • EN 61000-4-4:2012

  • EN 61000-4-5:2014+A1:2017

  • EN 61000-4-6:2014+AC:2015

  • EN 61000-4-8:2010

  • BS EN 50121-4:2016+A1:2019

  • BS EN 61000-6-4:2014

  • BS EN IEC 61000-3-2:2013+A1:2019

  • BS EN 61000-3-3:2013+A1:2019

  • BS EN 61000-4-2:2009

  • BS EN 61000-4-3:2006+A2:2010

  • BS EN 61000-4-4:2012

  • BS EN 61000-4-5:2014+A1:2017

  • BS EN 61000-4-6:2014

  • BS EN 61000-4-8:2010

RoHS 2 Directive 2011/65/EU & 2015/863/EU + RoHS 2 Directive 2020 No. 1647

RoHS 2 Directive 2011/65/EU & 2015/863/EU

Exemption(s) used:

6a, 6b, 6c

UKCA CE

FCC PART 15 VERIFICATION STATEMENT

WARNING

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

May contain transmitter module:

  • N7NMC7455

  • RYK-WPET236ACNBT

ICES-003 ISSUE 7 VERIFICATION STATEMENT

CAN ICES3(A)/NMB3(A)

This device complies with CAN ICES-003 Issue 7 Class A. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme à la norme CAN ICES-003 Issue 7 Class A. Le fonctionnement est soumis auxdeux conditions suivantes : (1) cet appareil ne doit pas causer d’interférences nuisibles et (2) cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant opération indésirable.

May contain transmitter module:

  • 2417C-MC7455

  • 6158A-PET236ACNBT